Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
I'll have to get the deflection measurement from my machinist as he did the testing. All 4 hubs are the same fp ones - just have one that has no play (too tight or just right) and 3 that have about the same play within a couple thou. One set I... (see full post)
So put a new set of fp hubs on a 2020 mustang road race car (M-1104-B) and after 1 race weekend (in the rain no less with too many fcy's) I was prepping for our next race at vir and noticed what I think is excessive play in the bearing. I called...
I ran this past weekend at road Atlanta in the rain on sat for the race. Not monsoon rain but wet enough for h2o wets. ran with no nannies and wasn't bad - car was sprung a bit stiff so turn in sucked. I have over 10,000 laps at road Atlanta... (see full post)
so we just had the car at its first real race at road Atlanta this past weekend (scca hoosier super tour and car is classed in T2). I went with a c&r radiator, c&r oil cooler mounted behind the rad and a small 12" fan next to that for when in... (see full post)
I've run the hoosier full radial wets (non-dot) on another car I run so I know they are like glue in the wet. I didn't think the stock nannies would be better than my feet but was just curious. (see full post)
so its supposed to rain this weekend at road Atlanta. 1st race on the new car (the test day went pretty well) and will be wet. question is in the dry we unplug the dyne plug thing and turn all the nannies off. has anyone raced in full wet...
yea its a new build so hoping to finish up this week and get on track on sat/sun to shake it down. ill give it a 1/4" of rake and leave it there for its 1st outing to see what settles/rubs/breaks/etc. (see full post)
I just put in a Trackspec cage in a 2018 and the fit and finish is awesome. Saved me so much time from bending tubing myself and I have a fab shop. My guys said there was no way to do it cheaper than buying the cage from them and it took about... (see full post)
I have been measuring from the bottom of the chassis (inside and just above the pinch weld) with the creative racing laser height measure things (some of the best $1500 ive spent on chassis equipment and integrates to my scales as well - so much... (see full post)
Ok so a little help? 2018 mustang gt road race car new build. trying to get on track this coming weekend to shake it down. Stuck on ride heights as what to set it at. First mustang ive build and run so kinda clueless on this. Mcs coilovers...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.